We are Manufactures, Exporters & Supplier of Rubber Support Inserts RSI or Rubber Pipe Support Inserts. Rubber Support Inserts (RSI) or Pipe Support Inserts is used to support / hang centralised AC pipelines (Chilled Water Pipe) without crushing the insulation. Also used to support condenser water and domestic hot / cold water pipe installations.
Rubber Support Inserts are used with chilled water pipes condenser water and domestic hot / cold water installations.
Rubber Pipe Support Insert is sutable for ceiling or vertical wall mounting.
Moulded Hard Rubber
RSI has very high Load Bearing Capacity.
Dimensionally Accurate as each piece is individually moulded.
Tongue and Groove Design.
Excellent Resistance to Moisture, Termites and Deterioration.
Rubber being an inert material, Rubber Support Inserts is not corrosive to metal pipes Rubber Support Insert is far superior to wood support inserts.
Material - Compounded Rubber
Hardness 85 +/-5
Density 1100-1500 kg/m3
Working Temperature -20 to 110oC
Tensile Strength min 1500PSI
1/2" to 2" Pipe OD X 25 mm Insulation Thickness X 25 mm RSI Width.
21/2" to 5" Pipe OD X 50 mm Insulation Thickness X 38 mm RSI Width.
6" to 16" Pipe OD X 50 mm Insulation Thickness X 50 mm RSI Width.
8", 10" & 16" Pipe OD X 75 mm Insulation Thickness X 50 mm RSI Width.
20" & 24" Pipe OD X 50 mm Insulation Thickness X 100mm RSI Width Reinforced with MS Patta.
Manufactures and Exporters of Rubber Support Inserts and Rubber Pipe Support Inserts